Fitting The Electronics - Fein KBU 35 PQ Repair Instructions

Metal core drilling
Fitting

9.3.8 Fitting the electronics

Steps that must be completed:
- Fitting the network cable
Tools:
- Torx T15; T20
4
5
7
4
6
C-SC_CSSM
1.
2
2.
3.
3
1
4.
5.
6.
7.
8.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Position the electronics (1).
Screw in the three screws (2) [0.9 Nm
Position the plug (3).
Position the protective hose (4).
Position the cover (5).
Connect all cables as shown in the connection diagram.
Position the cover (6).
Screw in the four screws (7) [2.7 Nm
±0.15 Nm ].
±0.3 Nm
].
11.02.2019 Page 81 of 88