Table of Contents
Advertisement
Rotary Drills
Fitting
9.3 Fitting the carbon brushes
Steps that must be completed:
-
Fitting the clutch and shafts
-
Fitting the switch pushbutton
-
Fitting the gearbox parts
-
Fitting the armature
-
Fitting the intermediate gearbox
-
Positioning the intermediate gearbox
-
Fitting the stator
-
Fitting the gearbox housing
Tools:
-
Slotted screwdriver
-
PH2 cross-tip screwdriver
-
Assembly aid
3
4
C-SC_CSSM
1
2
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1.
Position the carbon brush (1).
2.
Position the spring (2).
3.
Position the cable (3).
4.
Screw in the screw (4).
5.
Repeat steps 1 to 4 on the opposite side of the machine.
01.01.2019
Page 44 of 47
Advertisement
Table of Contents
