Metal core drilling
Fitting
9.2.4 Fitting the connecting piece
Steps that must be completed:
-
Fitting the drill motor electronics
-
Fitting the stator
2
1
4
C-SC_CSSM
1.
2.
3.
4.
3
5.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Position the connecting piece (1).
Lay the two connecting cables (2).
Connect the cables (3) to the connectors as shown in the
connection diagram.
Position the connectors in the respective opening.
Position the felt piece (4).
11.02.2019
Page 63 of 88