Fitting The Carbon Brushes - Fein KBU 110-4 M Repair Instructions

Metal core drilling
Assembly

9.2.6 Fitting the carbon brushes

Steps that must be completed:
- Fitting the stator
- Fitting the grooved ball bearings
- Fitting the armature
- Fitting the intermediate gearbox
- Positioning the intermediate gearbox
Tools:
- PH2 cross-tip screwdriver
1
2
3
4
6
7
C-SC_CSSM
1.
2.
3.
4.
5.
5
6.
7.
8.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Position the carbon brush holder (1).
Screw in the screw (2).
Position the carbon brush (3).
Connect the plug (4).
Position the spring (5).
Position the cover (6).
Screw in the screw (7) [1.1 Nm].
Repeat steps 1 to 7 on the opposite side of the machine.
23.01.2019 Page 60 of 75