Metal core drilling
Removal
8.2.3 Removing the drill motor
Steps that must be completed:
-
Removing the electronics
Tools:
-
PH2 cross-tip screwdriver
1
2
Photo shows similar
product
3
Photo shows similar
product
C-SC_CSSM
1.
2.
Crushing hazard around the drill motor
Crushing can occur.
Move the drill motor down using the spider, before the two
levers (3) are unscrewed.
3.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Unscrew the fillister head screw (1).
Remove the protective hose (2).
C
!
AUTION
Unscrew the two levers (3).
11.02.2019
Page 17 of 88