Metal core drilling
Fitting
9.2.7 Fitting the gearbox housing
Steps that must be completed:
-
Fitting the drill motor electronics
-
Fitting the stator
-
Fitting the connecting piece
-
Fitting the housing
-
Fitting the intermediate gearbox
Tools:
-
Torx T20
2
C-SC_CSSM
1.
1
2.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Place the gearbox housing (1) on the drill motor.
Screw in the four screws (2).
11.02.2019
Page 66 of 88