Positioning The Spider - Fein KBU 35 PQ Repair Instructions

Metal core drilling
Fitting

9.3.2 Positioning the spider

Steps that must be completed:
- Fitting the spider
Tools:
- Arbor press
- Sleeve
26 mm inner diameter
30 mm outer diameter
- Circlip pliers
C-SC_CSSM
1.
1
2.
3
3.
2
4.
3
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Press in the bush (1).
Repeat step 1 on the opposite side of the machine.
Position the spider (2).
Fit the circlip (3).
11.02.2019 Page 70 of 88