Removing The Spider - Fein KBU 35 PQ Repair Instructions

Metal core drilling
Removal

8.2.8 Removing the spider

Steps that must be completed:
- Removing the electronics
- Removing the drill motor
- Removing the guide
Tools:
- Circlip pliers
- Inner bearing puller, 18–22 mm
- Slide hammer
3
C-SC_CSSM
1.
1
2.
2
3.
4.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Remove the circlip (1).
Pull out the spider (2).
Remove bush (3).
Repeat step 3 on the opposite side of the machine.
11.02.2019 Page 26 of 88