Metal core drilling
Removal
8.4.8 Removing the armature
Steps that must be completed:
-
Removing the carbon brushes
-
Removing the electronics
-
Removing the drill motor
-
Removing the gearbox housing
-
Removing the intermediate gearbox
Tools:
-
Arbor press
-
Punch, 10 mm
-
Drawing-off socket cap
-
Chuck cone 26 mm
-
Chuck cone 19 mm
1
C-SC_CSSM
2.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Press out the armature (1).
11.02.2019
Page 37 of 88