Fein Repair Tool
4.1. Drill motor – loosen the drill rig
2.
1.
1.
Remove the cover
2.
Disconnect the cable
3.
Loosen the safety strap on the SEM bracket
disconnect the protective hose.
4.
Remove the upper flat-headed screw
5.
Loosen the clamping lever
3.
(1050)
from the drill rig housing
(250, 260, 265)
from the board
(810)
(620)
and lift the drill motor
Alle Rechte bei FEIN, insbesondere für den Fall der Schutzrechtsanmeldung.
Jede Verfügungsbefugnis wie Kopieren und Weitergaberecht liegt bei FEIN.
4.
(700)
.
(990) .
(1060)
with a screwdriver and
.
(10-620)
5.
Tools:
•PH2 cross-slotted
screwdriver
•Slotted screw-
driver, 1.2
6.5
up and out.
MVK 03 / 07