Metal Core Drilling
Disassembly
Removing the drill motor
Steps that must be completed:
-
Removing the container
-
Removing the control panel
-
Removing the electronics
Tools:
-
Slotted screwdriver
-
Socket head wrench, 6 mm
1
3
2
4
C-SC_CSSM
1.
2.
3.
5
Crushing hazard around the drill motor
Crushing can occur.
Move the drill motor down using the spider before unscrewing
the two screws (4).
4.
5.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Unscrew the screw (1).
Remove the plug
(2).
Remove the protective hose (3).
C
!
AUTION
Unscrew the two screws (4).
Slide the drill motor (5) out of the guide.
01.04.2021
34130550060
Printed in Germany
Page 16 of 92