Fitting The Motor Housing; Fitting The Armature - Fein BOZ 32-4M Repair Instructions

Rotary Drills
Fitting

9.2 Fitting the motor housing

9.2.1 Fitting the armature

Tools:
- Arbor press
- Circlip pliers
1
3
C-SC_CSSM
2
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1. Press on the grooved ball bearing (1).
2. Position the disc (2).
3. Coat the ring magnet (3) with Loctite 648.
I
NFORMATION
Note the position of the ring magnets.
4. Position the ring magnet (3).
01.01.2019 Page 33 of 47