Rotary Drills
Fitting
9
Fitting
9.1 Fitting the gearbox housing
9.1.1 Fitting the clutch and shafts
Tools:
-
Arbor press
-
Sleeve
54 mm outer diameter;
26 mm inner diameter, 28 mm outer diameter
-
Circlip pliers
1
0
3
4
C-SC_CSSM
2
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1.
Press the grooved ball bearing (1) onto the shaft (2).
2.
Position the circlip (3).
3.
Press in the shaft (4).
4.
Position the disc.
01.01.2019
Page 28 of 47