Fitting The Network Cable - Fein KBE 52-2 M Repair Instructions

Metal Core Drilling
Assembly

Fitting the network cable

Steps that must be completed:
- Fit the electronics
- Assembling the control panel
Tools:
- Torx T15, T20
3
1
5
6
2
C-SC_CSSM
2
4
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1. Position the mains cable (1).
2. Position the cable clamp (2).
3. Screw in the screw (3) [0.9 Nm
4. Position the cover (4).
5. Screw in the screw (5) [1.8 Nm
6. Screw in the screw (6).
34130550060
Printed in Germany
±0.1 Nm
].
±0.1 Nm
].
01.04.2021 Page 61 of 92