Fitting The Guide - Fein KBU 110-4 M Repair Instructions

Metal core drilling
Assembly

9.3.2 Fitting the guide

Steps that must be completed:
- Fitting the stator
- Fitting the grooved ball bearings
- Fitting the armature
- Fitting the intermediate gearbox
Tools:
- 5 mm socket head wrench with pin; 2.5 mm
- PH2 cross-tip screwdriver
1
2
4
C-SC_CSSM
1.
2.
3
3.
4.
5
5.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Position the gear rack (1).
Screw in the cylinder head screws (2).
Slightly tighten the cylinder head screws (3).
Position the guide (4).
Screw in the six cylinder head screw with circlips (5).
23.01.2019 Page 62 of 75