SMC Networks EX600-SPR Series Operation Manual page 63

Unit parameter settings
Double click a unit that you want to set on the configuration table, select [Parameter Assignment] tab. The
setting method is the same as described above for system parameter setting.
Diagnostics
Diagnostic mode
The diagnostic mode can be set at Diag. Mode in the system parameter setting.
No. Diagnostic mode
1 No diag.
2 Device diag
3 Device + Module diag.
4 Device + Module + Channel Diag
Channel diagnostics
Contents
Provides standard diagnostic data
Provides standard diagnostic + system diagnostic data
Provides standard diagnostic + system diagnostic + unit
diagnostic data
Provides standard diagnostic + system diagnostic + unit
diagnostic + channel diagnostic data
System diagnostics
Unit diagnostics
- 63 -
No.EX##-OML0005