Adding Units - SMC Networks EX600-SPR Series Operation Manual

Adding units

Select "EX600-SPR1/2" from the station window.
An empty slot for EX600-SPR1/2 will be displayed on the configuration table, below the station window.
Drag and drop the connected unit from [Hardware Catalogue] Window to slot 1. Please make sure to add
the unit as the real system's order of connecting (i.e. Unit 0 at Slot 1).
Add the other units, according to the connected order, to the configuration table, ending with the SI unit.
The SI unit for 32, 24, 16, 8 coils can be selected, please make sure to match the setting with the V_SEL
switch setting in the SI unit.
- 61 -
No.EX##-OML0005