System Information; Terminal Information; Implement Software Identification; Master Switch - CONCORD NT30 Operator's Manual

3. Operation

3.21 System information

3.21.1 Terminal information

Read and understand the terminal operator manual(s) before reading the implement software information.
The terminal operator manual can contain this information:
• Installing the terminal in the tractor
• Button or touch screen operation
• Changing data information
• Volume control
• Display brightness
• Terminal and implement language and measurement units
• Setting the date and time
• Auxiliary input setup for the external master switch
• Ground speed calibration
• Making as applied maps, if available
• Variable rate application, if available
NOTE: For more information on section control with a C1000 terminal, see the Task Controller operator
manual.
For more information on section control with a C3000 terminal, see the Auto-Guide 3000 Advanced for
C3000 terminal operator manual.

3.21.2 Implement software identification

The software identification information is located on the software maintenance screen.
Select the icons in this order:
The information (1) will change when software is
updated.
Give this information to your dealer when
necessary:
Software version:
Software build:
Select to go back to the settings screen.

3.21.3 Master switch

There are two types of master switches:
• External master switch
• Terminal master switch
See the information for external master switch or terminal master switch.
The master switch must be turned off when:
Fig. 60
94
GUID-EC4A39FE-36A4-4C61-BD6A-E91F11A2FD83 [V1]
GUID-C2E56BF8-3934-4699-B375-ED9300FB4741 [V1]
GUID-B651916E-D5AB-4ECA-B8D2-AC6D3124C307-high.jpg [High]
GUID-3BF88251-B9D6-4DAF-8297-45FB0FE38216 [V1]
Narrow-Transport Grain
Drill (322782B)