Table of Contents
Advertisement
• Transporting
• Stationary
• The operator is not in the tractor
3.21.3.1 External master switch
An external master switch can be used if:
• The terminal harness has an auxiliary function connection, or
• The terminal or tractor has an external auxiliary function switch
Connect the external master switch to the terminal harness close to the terminal. Mount the external
master switch within reach of the operator.
During field operation, move the external master switch to the on position to start planting. Ground speed
will control the product application rate.
Move the external master switch to the off position to stop planting. The external master switch must be in
the off position when:
• Not planting
• Transporting
• Doing maintenance
3.21.3.2 Terminal master switch
During field operation, select
The background color of the terminal master switch will change:
• White - terminal master swtich off
• Yellow - stand-by
• Green - seeding
Ground speed will control the product application rate.
Select
to stop seed flow.
3.21.4 Virtual switch box
On the implement main screen, select
The virtual switch box is used to manually turn
individual sections or hoppers on and off without
turning the master switch off.
The virtual switch box is also an alternative to a
physical switch box, if one is not available.
There are two ways turn on or off a section:
• Select the icon (1) on the right side of the
screen, or
• Select the section (2)
Select the correct hopper (3) to turn on or off.
If
is selected, the meters assigned to the
product and/or sections that are active (on the
virtual switch box screen) will turn one complete
Narrow-Transport Grain
Drill (322782B)
to start planting.
to see the virtual switch box.
Fig. 61
95
3. Operation
GUID-FBF8869C-DF63-40EA-BF84-4A6AA7D866D0 [V1]
GUID-D1C14243-2CF0-42B3-87D0-AE57E8D21EB0 [V1]
GUID-23D59034-2995-4599-B2D3-ADE4B5E3481C [V1]
GUID-48A8F67B-DB21-47B7-AC29-E44E30EC306E-high.jpg [High]
Advertisement
Table of Contents
Troubleshooting
