Hydraulic Lock-Out Valves - CONCORD NT30 Operator's Manual

1. Safety

1.7 Hydraulic lock-out valves

The hydraulic lock-out valve is on the front of the
frame, on the left-hand side of the front hitch.
The toolbar lock-out valve (1) is installed on all
drills. The toolbar lock-out valve is used to
hydraulically lock the toolbars in the transport or
raised position.
WARNING:
The toolbars can drop to the ground
when the toolbar lock-out valve is
opened. Make sure the area below
the toolbars is clear of people and
obstructions before opening the
toolbar lock-out valve.
Move the valve handle so the handle is parallel to
the frame to put the lock-out valve in the open
position (1). In the open position hydraulic pressure
can flow through the valve.
Move the valve handle up to put the lock-out valve
in the closed position (2). In the closed position the
hydraulic pressure will not flow through the valve.
IMPORTANT: Open the valve when seeding and
close the valve when transporting the drill.
Fig. 36
Fig. 37
30
GUID-6E222466-8AE6-4E5D-83D2-1DFE1D916C68 [V1]
GUID-B6BF3DB2-FE9A-4241-9893-DBF2FA0D2A77-high.jpg [High]
GUID-7E9CDA00-04CD-4CF0-B512-39EC3A6936DB-high.jpg [High]
Narrow-Transport Grain
Drill (322782B)