Disconnect The Machine From The Tractor - CONCORD NT30 Operator's Manual

3.6 Disconnect the machine from the tractor

NOTE: Lower the wings for storage when possible.
Procedure
1. Park the tractor and machine on a solid level surface.
2. Stop the engine, set the park brake, and take the ignition key with you.
3. Use the tractor hydraulics to lower the wings to the ground if possible.
4. Use the tractor hydraulics to fully lift the toolbars.
5. Stop the engine, set the tractor park brake, and take the ignition key with you.
6. When disconnecting the machine with the
wing frames lifted, install the wing lock pins
(1) and wire lock pins (2) in the wing lock
brackets (3).
7. Use the toolbar locks (1) to lock the toolbars
in the locked position (2).
Narrow-Transport Grain
Drill (322782B)
Fig. 11
Fig. 12
59
3. Operation
GUID-ACA3932A-5DD4-41DF-9891-687A91740AE5 [V3]
GUID-1A9E5C47-CC3E-4796-B93B-ECEF777DC596-high.jpg [High]
GUID-D9AFABDD-A489-4790-A45A-4B34E1F17C86-low.png [Low]