Prepare The Machine For Transport - CONCORD NT30 Operator's Manual

3.13 Prepare the machine for transport

Before starting the procedure
Stop the tractor before preparing the machine for transport. Remove the remaining seed from the
hopper before transporting.
Procedure
1. Use the tractor hydraulics to lift the frame of the machine to the highest position.
2. Use the tractor hydraulics to fully lift the toolbars of the machine.
3. Use the tractor hydraulics to fully lift the wings of the machine.
4. Stop the engine, apply the tractor park brake, and take the ignition key with you.
5. Move the handle of the toolbar lock-out (1) to
the closed position.
6. Lock the wings in the raised position by
installing the wing lock pins (1) and wire lock
pins (2) in the wing lock brackets (3).
Narrow-Transport Grain
Drill (322782B)
Fig. 25
Fig. 26
71
3. Operation
GUID-9371DA58-F482-4E1B-B588-57561D40EC28 [V2]
GUID-B6BF3DB2-FE9A-4241-9893-DBF2FA0D2A77-high.jpg [High]
GUID-1A9E5C47-CC3E-4796-B93B-ECEF777DC596-high.jpg [High]