Introduction; Safety Alert Symbol; Safety Messages; Information Messages - CONCORD NT30 Operator's Manual

1.1 Introduction

1.1.1 Safety symbol
The safety symbol tells you about a potentially
hazardous area!
Look for the safety symbol in this manual and on
the machine. The safety symbols tell you that
there is important safety instructions in the
manual.

1.1.2 Safety messages

The words DANGER, WARNING or CAUTION
are used with the safety symbol. Learn these
safety messages and obey the recommended
precautions and safety instructions.
DANGER:
If you do not obey the recommended
precautions and safety instructions,
DEATH OR INJURY will occur.
WARNING:
If you do not obey the recommended
precautions and safety instructions,
DEATH OR INJURY can occur.
CAUTION:
If you do not obey the recommended
precautions and safety instructions,
INJURY can possibly occur.

1.1.3 Information messages

The words important and note are not related to personal safety, and are used to give information about the
operation and servicing of the machine.
IMPORTANT: Identifies special instructions or procedures which, if not followed, can cause damage to the
machine, the process, or the area around the machine.
NOTE: Information to make procedures easier.

1.1.4 Safety signs

WARNING:
Do not remove the safety signs. Replace safety signs that you cannot read, are
damaged, or are missing.
Clean the machine surface with a weak soap and water solution before you replace the safety signs.
Replacement safety signs are available from your dealer.
Narrow-Transport Grain
Drill (322782B)
Fig. 1
Fig. 2
11
1. Safety
[V]
GUID-5D9F270E-D748-4741-82B1-BE49B78685F2 [V5]
GUID-4C201302-DBD2-4BFB-8D98-1DDED263BD6E-high.jpg [High]
GUID-E54F7740-C021-42A8-8784-4287BE4356C8 [V4]
GUID-73F05026-C37B-415A-8140-AD939A283378-high.jpg [High]
GUID-9A909F52-D57E-4C30-8CC7-6FDB6D7E9982 [V3]
GUID-2FB17168-6A01-47C5-B298-234AF171520B [V7]