Wing Lock Pins; Install The Wing Lock Pins - CONCORD NT30 Operator's Manual

1. Safety

1.5 Wing lock pins

The machine is equipped with two wing lock pins. The wing lock pins are used to lock the wings in the
raised or folded position. Install the wing lock pins when transporting or servicing the drill.
When unlocking the wings, keep the wing lock
pins (1) and wire lock pins in the brackets (2)
located on the main frame (3). The wing lock
brackets are located at the hinge points of each
wing.

1.5.1 Install the wing lock pins

Install the wing lock pins when the machine is to be transported or serviced with the wing in the raised or
folded position.
Procedure
1. Use the tractor hydraulics to fully lift the wings of the machine.
2.
Stop the engine, set the tractor park brake , and take the ignition key with you.
3. Remove the wire lock pin (2) from the end of
the wing lock pin (1).
4. Remove the wing lock pin (1) from the
storage bracket (3).
Fig. 24
Fig. 25
24
GUID-909C5F4F-6593-4B50-9C50-90B74366A9F9-high.jpg [High]
GUID-242F4D7B-AD14-47C0-9BA9-869BB3D619B6 [V2]
GUID-909C5F4F-6593-4B50-9C50-90B74366A9F9-high.jpg [High]
Narrow-Transport Grain
Drill (322782B)