Table of Contents
Advertisement
1.1 Safety Symbol
The safety symbol tells you about a potentially hazardous
area!
Look for the safety symbol in this manual and on the ma-
chine. The safety symbols tell you that there is important
safety instructions in the manual.
1.2 Safety Messages
The words DANGER, WARNING, or CAUTION are used
with the safety symbol. Learn these safety messages and
obey the recommended precautions and safety instruc-
tions.
DANGER:
If you do not obey the recommended precautions
and safety instructions, DEATH or INJURY will
occur.
WARNING:
If you do not obey the recommended precautions
and safety instructions, DEATH or INJURY will
occur.
CAUTION:
If you do not obey the recomended precautions and
safety instructions, INJURY can possibly occur.
1.3 Information Messages
The words important and note are not related to personal
safety, and are used to give information about the opera-
tion and servicing of the machine.
IMPORTANT: Identifies special instruction or procedures
which, if not followed, can cause damage to the machine,
the process, or the area around the machine.
NOTE: Information to make procedures easier.
1.4 Safety signs
WARNING:
Do not remove the safety signs. Replace safety
signs that you cannot read, are damaged, or are
missing.
Clean the machine surface with a weak soap and water
solution before you replace the safety signs. Replacement
safety signs are available from your dealer.
Always make sure that safety signs are in the correct loca-
tioins and that you can read the safety signs. Illustrations
of the safety signs are in this section.
1.5 This Manual
This manual covers general safety instructions for this
machine. Keep this manual with the machine.
Right and Left, as used in this manual, are given as if
you are in the operator seat.
The photos and illustrations used in this manual were up
to date when published, but in-line production changes
can make your machine have small differences. The
manufacturer reserves the right to redesign and change
the machine as necessary without notification.
7
1. Safety
Precision Shank Drill
Operators Manual - 74356-02
Advertisement
Table of Contents
