Operation; Prepare For Operation; General Information; Personal Protective Equipment - CONCORD NT30 Operator's Manual

1. Safety

1.2 Operation

GUID-A25B667B-D7CF-4C75-8AED-C10113104322 [V6]

1.2.1 Prepare for operation

Read and understand all operation instructions and precautions in this manual before you operate the
machine or do the servicing.
Make sure that you know and understand the positions and operations of all controls. Make sure that all
controls are in neutral and that the parking brake is applied before you start the machine.
Make sure that all persons are away from your area of work before you start and operate the machine.
Examine and learn the controls in an area that is clear of persons and obstacles before you start work.
Know the machine dimensions and make sure that you have sufficient space available to operate the
machine. Do not operate the machine at high speeds in crowded areas.
It is important to know and use the correct procedures when you do work around and operate the
machine. Do not let children or unqualified persons operate the machine. Keep others, especially children,
away from your area of work. Do not let others ride on the machine.
Make sure that the machine is in good condition for operation. Refer to the operator manual. Make sure
that the machine has the correct equipment required by local regulations.
All equipment has a limit. Make sure you understand the speed, brakes, steering, stability and load
characteristics of this machine and the tractor before you start.
GUID-A3ACB803-2E1D-4690-84C2-84FEDB4354EB [V6]

1.2.2 General information

When parking, park the machine and the tractor on
a solid level surface. put all controls in neutral and
apply the tractor park brake. Stop the tractor
engine and take the key with you.
Make sure the tractor and implement are in the
proper operating condition according to the
operator manuals. Make sure the tractor brakes
and the machine brakes are adjusted correctly.
The tractor must have enough weight and braking
capacity, especially when operating on roads and
terrain that is not even. Use a tractor of
recommended size and weight to tow the machine.
GUID-E77631FB-0DC0-4637-9090-88018315176E-high.jpg [High]
Tractor must be equipped with rollover protective
Fig. 4
structure (ROPS) and a seat belt. Use seat belt
during operation.
Do not dismount from moving machinery.
Always operate the machine with the terminal
turned on.
Never start the tractor with the PTO engaged or
terminal turned on.
Stay off slopes too steep for operation.
Where possible avoid operating the machine near
ditches, embankments, and holes. Reduce ground
speed when operating on rough, slippery, or muddy
surfaces and when turning or crossing slopes.
Be aware of the size of the machine and have
enough space available to allow for operation.
14
Narrow-Transport Grain
Drill (322782B)