Fertilizer Bander Attachment; Adjusting Fertilizer Bander Depth - CONCORD NT30 Operator's Manual

7.1 Fertilizer bander attachment

The optional fertilizer bander attachment (1)
applies anhydrous ammonia or fertilizer between
the two furrows that are made by the opening disc
assemblies. The fertilizer bander attachment is
installed forward of the opening disc assemblies.
The depth at which the fertilizer bander applies the
fertilizer is set using a cam block (1). The slots (2)
in the cam block determine the depth of the
fertilizer. The deeper the slot in the cam block; the
deeper the fertilizer is applied.
IMPORTANT: When operating in rocky soil
conditions, do not operate at a high rate of speed.
High speeds in rocky conditions will damage the
fertilizer bander attachment.

7.1.1 Adjusting fertilizer bander depth

Before starting the procedure
To adjust the fertilizer bander depth the machine must be connected to the correct size of tractor to
operate the machine.
Procedure
1. Raise the frame of the machine until the bander discs are off of the ground.
2. Stop the tractor. Stop the engine, apply the tractor park brake, and take the ignition key with you.
Narrow-Transport Grain
Drill (322782B)
Fig. 1
Fig. 2
137
7. Accessories
GUID-3EBBF264-442F-4934-B8AD-B4B997605A08 [V1]
GUID-88E8D563-C1AF-4CDF-ADBC-9DE634F40E0D-high.jpg [High]
GUID-F4EA461F-FD30-4635-A860-248521FB55DF-high.jpg [High]
GUID-63A7657E-3B65-4C69-8728-B78A57F71000 [V1]