Unlock The Toolbar Locks - CONCORD NT30 Operator's Manual

1. Safety
6. Put the toolbar lock tool (1) in the storage
position (2) when complete.
7.
Attach the toolbar lock tool to the light bar
assembly with the wire lock pin (3).

1.6.2 Unlock the toolbar locks

Unlock the toolbars before operation in the field.
Procedure
1. Use the tractor hydraulics to fully lift the toolbars to remove the load.
2. Stop the engine, set the tractor park brake, and take the ignition key with you.
3. Remove the toolbar lock tool (1) from the
storage position (2). Remove the wire lock
pin (3) that attaches the toolbar lock to the
light bar assembly.
4. Use the toolbar lock tool to push and turn the
lock (1) counter-clockwise to the unlocked
position (2).
The toolbar is unlocked when released from
the slot and extended back.
5. Use the same procedure to unlock the
remaining toolbars on the drill.
Fig. 32
Fig. 33
Fig. 34
28
GUID-31BBFFA0-6624-4B55-9C84-70F6B5BA697A-high.jpg [High]
GUID-54EDC61F-191C-4088-AD80-4A5C9C9291EE [V2]
GUID-31BBFFA0-6624-4B55-9C84-70F6B5BA697A-high.jpg [High]
GUID-93F8720A-8DA2-4FAF-822D-99BFDEBB5A31-high.jpg [High]
Narrow-Transport Grain
Drill (322782B)