Remove The Wing Lock Pins - CONCORD NT30 Operator's Manual

5. Install the wing lock pin (1) through the holes
in the wing lock brackets (3).
6.
Install the wire lock pin (2) in the end of the
wing lock pin.
7. Use the same procedure to install the remaining wing lock pins in the wing lock brackets on the
remaining hinge points.

1.5.2 Remove the wing lock pins

Remove the wing lock pins before lowering the wings of the machine.
Procedure
1. Use the tractor hydraulics to remove any load from the wing lock pins by completely raising the
wings.
2. Stop the engine, set the tractor park brake, and take the ignition key with you.
3. Remove the wire lock pin (2 )from the end of
the wing lock pin (1).
4. Remove the wing lock pin (1) from the wing
lock brackets (3).
5. Install the wing lock pin (1) in the storage
bracket (3) on the main frame of the
machine.
6. Install the wire lock pin (2)in the end of the
wing lock pin (1).
7. Remove the remaining wing lock pins from the wing lock brackets of the remaining hinge points.
Narrow-Transport Grain
Drill (322782B)
Fig. 26
Fig. 27
Fig. 28
25
1. Safety
GUID-1A9E5C47-CC3E-4796-B93B-ECEF777DC596-high.jpg [High]
GUID-48365246-6ED0-4E25-B58A-8200D20DE489 [V2]
GUID-1A9E5C47-CC3E-4796-B93B-ECEF777DC596-high.jpg [High]
GUID-909C5F4F-6593-4B50-9C50-90B74366A9F9-high.jpg [High]