CONCORD NT30 Operator's Manual page 92

3. Operation
• White - Off when controlled by the vitural switch box or Task Controller
• Yellow - Standby
System status
The speedometer (1) will show the speed of the
source of the ground speed:
Drill GPS
Tractor ISOBUS GPS
Hold speed
Select the fan control (2) to turn on or off. The
background of the fan control will change:
• Green - manual on
• White - manual off
• Yellow - manual on, rate not met
NOTE: If the state is yellow, the target is not met
and seeding performance will be compromised.
Below the fan control is a bar chart (3) that shows
the target speed and the actual speed.
Select the down pressure (4) to turn on or off. The
background of the down pressure will change:
• Green - manual on
• White - manual off
• Yellow - manual on, rate not met
NOTE: If the state is yellow, the target is not met
and seeding performance will be compromised.
Below the down pressure is a bar chart (5) that
shows the target pressure and actual pressure.
The lift state (6) will change:
Up
Down
Area counter (7) also shows on the main screen.
Fig. 58
92
GUID-A86A91B4-EB06-4F27-85CF-153280DB6740-high.jpg [High]
Narrow-Transport Grain
Drill (322782B)