Software Information; Software Icon Descriptions - CONCORD NT30 Operator's Manual

3. Operation

3.20 Software information

3.20.1 Software icon descriptions

Main screen icons
Master apply switch
Switch between preset down pressure values
Virtual switch box
Down pressure settings
Product rate settings
Next page
Calibration screen
Totals screen
Settings screen
Maintenance screen
Go back to previous screen
Virtual switch box
Select to turn the section on or off Select
to prime the meters
Down pressure
Increase down pressure
Decrease down pressure
Select to see the preset value information
Product rate
Increase product application rate
Decrease product application rate
90
[V]
GUID-0062B74C-A626-4FF3-BD73-FBB98A355C49 [V1]
Narrow-Transport Grain
Drill (322782B)