Adjust The Seed Depth; Initial Seed Depth Collar Sequences - CONCORD NT30 Operator's Manual

3. Operation
Fig. 49

3.16.6.3 Initial seed depth collar sequences

The initial seed depth collar sequence is the total length of the depth collars installed on the shaft of the
frame height cylinders. The initial seed depth collar sequence is a starting point. The sequence of depth
collars will change with the field conditions.
Use the following initial seed depth collar sequences when checking seed depth.
• Small Grains and Beans: 7.5 inch (19.1 cm) sequence (blue (2), silver
(1))
• Canola: 9.75 inch (24.8 cm) sequence (blue (2), silver (2), green (1))

3.16.6.4 Adjust the seed depth

Procedure
1. Raise the drill frame to the highest height.
2. Install the recommended initial sequence of
depth collars (1) on the shaft of each of the
frame height cylinders (2).
NOTE: See the decal on the front of the
frame for the sequence of seed depth collars.
3. Operate the drill in the field and check the
seed depth.
4. Adjust the sequence of seed depth collars.
Check the seed depth until the seed is at the
correct seed depth.
Fig. 50
84
GUID-A25C4E81-A124-4916-9CC9-E8E09AA8C741-high.jpg [High]
GUID-EB8082A6-B93C-4BC2-BB92-6F546A9F4EFA [V1]
GUID-649A31C4-6A66-485B-B9C6-86C9A52AB443 [V3]
GUID-877F7751-7D53-4D5E-957E-2CFEBA25CC2E-high.jpg [High]
Narrow-Transport Grain
Drill (322782B)