CONCORD NT30 Operator's Manual page 58

3. Operation
11. Start the tractor and use the tractor hydraulics to lift the frame of the machine to the highest position.
12.
If the wing frames were down during storage, make sure the wing cylinders are connected to the wing
frames.
13. Use the tractor hydraulics to fully lift the wing frames of the machine.
14. Stop the engine, set the park brake, and take the ignition key with you.
15. Remove the wheel chocks (1) or blocks from
in front of and behind the frame support tires
(2).
16. Make sure all people, pets, and obstructions
are clear before moving the tractor and
machine.
Fig. 10
58
GUID-CC37673A-B332-4A4A-BD46-BDF549CB9A58-high.jpg [High]
Narrow-Transport Grain
Drill (322782B)