Setting The Dc Output - Helios ICT Platinum Series Instruction Manual

Back X Key: Press to return to the previous higher level menu item,
or to exit from a setting without making any change.
For a detailed description of the Control Panel screens and
•
menus, see the Control Panel Menus section.

3.2. Setting the DC Output

To set the output voltage, current limit, and enable the output, do the
following:
1. Use the Up/Down keys on the Control Panel to scroll to the
System Status screen, and then press the Enter key. The
System Settings screen will appear.
2. Using the Up/Down keys, scroll to the Output Voltage line, and
then press the Enter key.
3. Using the Up/Down keys, adjust the output voltage set point to
the desired voltage, and then press the Enter key.
4. Using the Up/Down keys, scroll to the Current Limit line, and
then press the Enter key.
5. Using the Up/Down keys, adjust the current limit set point to
the desired current, and then press the Enter key.
12