Email Setup - Helios ICT Platinum Series Instruction Manual

Authentication Password: If an authentication protocol is
•
selected, enter the authentication password.
Privacy Protocol: Select the SNMPv3 privacy protocol
•
(None, or AES).
Privacy Password: If a privacy protocol is selected, enter
•
the privacy password.
SNMP Trap Settings:
Trap Community: Assign the community string/password
•
that will be sent with all traps. Some trap receivers are able
to filter based on Trap Community.
Trap IP Addresses: Assign the IP address for up to two
•
devices that will receive SNMP traps from the panel.

5.6. Email Setup

The ICT Platinum Series is capable of sending email alarm
notifications to multiple email addresses. Configure these settings on
the EMAIL SETUP tab if you would like to receive e-mail alarm
notifications from the power supply. The information for the following
settings is available from your Network Administrator or Internet
Service Provider (ISP). Click the Save Settings button to save any
changes made to this page.
SMTP Server: The name or IP address of your SMTP server
•
used for sending outgoing e-mail.
SMTP Port: The port used by your SMTP server. The
•
standard port used by most SMTP servers is 25.
SMTP Server requires SSL: Check this box if your SMTP
•
server requires an encrypted SSL connection.
This box should normally be check if the SMTP port used by
the SMTP server is 465.
43