Maintenance - Helios ICT Platinum Series Instruction Manual

the default setting. See the Password Reset section for more
information.
Select a User to Edit or Add a New User: Choose which of the user
accounts to edit, or add a new user. Set the access level to be
appropriate for the amount of control each user requires.
Administrator: This level has full access to the panel
•
settings, and can set up users and change passwords
("admin" is the default user)
Control: User has read-only access to the panel, but can
•
enable or disable the output, and change some of the basic
settings. Cannot change passwords or network settings.
View-Only: User can only view status, cannot change any
•
settings
New Password: Allows you to change the password for the selected
user.
Confirm New Password: When changing a password, you must re-
enter the new password here to confirm.
Administrator Password: Enter the current Administrator password
here to confirm changes.

5.8. Maintenance

The MAINTENANCE tab allows you to reset the power supply
communications, restore the power supply communications and
alarm settings to the factory default settings, and send a test e-mail
to verify email connections using the Web server interface screen.
Reset Communications
Pressing the Reset button will reset the communications controller on
the power supply without interrupting DC power to the output
terminals. All existing settings will be maintained.
Restore Factory Default Settings
Pressing the Restore button will restore ALL communications and
alarm settings to the original factory default values, including all
passwords. If you only want to reset the IP address and Administrator
45