Tcp/Ip Web Based Utility - Helios ICT Platinum Series Instruction Manual

5. TCP/IP WEB BASED UTILITY

Use the embedded Web server via an Ethernet connection to monitor
the status of the power supply, and change the power supply's
settings and configuration when the unit is powered from the AC line
or an external back-up battery.
The embedded Web server provides a full featured interface to the
power supply that can be easily accessed through a standard Web
browser on any network-connected computer. There is no additional
software to install or configure.
Follow these steps to access the Platinum Series embedded Web
server from a browser. The recommended web browsers to use with
this power supply are Microsoft Edge, Microsoft Internet Explorer,
Mozilla Firefox or Google Chrome.
1. Start your Web browser.
2. Enter the IP address of the power supply in the location/address
field of the browser.
If the power supply is connected to a network with a DHCP server,
the power supply will be assigned an IP address automatically. The
current IP address of the power supply can be found on the Network
Status screen on the front panel (see the Control Panel Menus
section for more information). If the power supply is not connected to
a network with DHCP, it will use a default IP address of
192.168.0.180.
You can also find the IP address of any ICT unit connected to a
network by running the ICT IP Address Discovery Utility app on any
Windows based computer connected to the same network. This tool
is available for download on the ICT Website:
http://www.ict-power.com/tools-utilities/
29