Helios ICT Platinum Series Instruction Manual page 21

LCD Password Settings
The LCD Password Settings screen allows you to set a Control
Panel menu password to prevent unauthorized changes to the
power supply settings. After the Control Panel menu password
is set, you will be prompted for the password when attempting
to change the power supply settings.
The Control Panel menu password is a four-digit password that
is entered one digit at a time. When entering the password, use
the Up/Down keys to set the value for selected digit, then press
the enter key to select the next digit.
If you lose the Control Panel menu password, see the
•
Control Panel Menu Password Reset section for
instructions on how to clear the password
Set LCD Password: Allows you to set the Control Panel menu
password.
Clear LCD Password: Allows you to clear the Control Panel
menu password.
Set Lockout Timer: Allows you to set the Lockout Timer for
the Control Panel menu password between 0 - 60min. When
the Lockout Timer is enabled, it sets the amount of time it will
take for you to be locked out of the Control Panel settings and
need to enter the password. Setting the Lockout Timer to 0
minutes disables the timer completely. The default factory
setting is 15 min.
Restart Comm Controller: Restarts the Communications Controller
without affecting any of the device settings and without interrupting DC
power to the output terminals.
21