Helios ICT Platinum Series Instruction Manual page 42

The information available from the SNMP agent is described in a MIB
(Management Information Base) file, which can be downloaded from
the link at the bottom of the SNMP box on this GUI page, or on the
Help page. The unique Platinum Series MIB file must then be
imported into your external SNMP management software.
Enable SNMP: Check this box to enable the SNMP agent.
•
SNMP Version: Sets the SNMP version (v1/v2c, v3, or All)
•
supported by the SNMP agent. If All is selected, all SNMP
versions will be supported simultaneously. The appropriate
settings for the selected SNMP version will need to be
configured.
Enable SNMP Write Access: Check this box to allow
•
remote SNMP control of the power supply output. If this box
is unchecked, all information available from the SNMP agent
will be read-only.
SNMP Contact Information: Assign contact information,
•
such as an operator name and phone number for the panel,
which can be read via SNMP queries. This information is
optional.
SNMPv1/v2c Settings:
Read Community: Enter the community string/password for
•
read-only SNMP access. The default read community string
is "public".
Write Community: Enter the community string/password for
•
read-write SNMP access. The default write community is
"write".
NOTE:
The community strings should be changed to unique passwords
before enabling SNMP, as the defaults are well known.
SNMPv3Settings:
User Name: Enter the user name for SNMPv3 access.
•
Authentication Protocol: Select the SNMPv3 authentication
•
protocol (None, MD5, or SHA).