Page 1
QUALITY POWER SOLUTIONS BACKED UP BY REAL-WORLD ENGINEERING EXPERIENCE User’s Manual SR250HL Power Supply/ Float Charger for Lead Acid Ba$eries STANDARD FEATURES OPTIONAL FEATURES Comms: • RS232 • RS485 3 Relay Alarms-Form C • Modbus • SNMP & Webpages Float Charger –Lead Acid Ba$eries Customizable Digital I/O Temperature Sensor on 1.7m lead with adhesive...
SR250HL Series - 250 W Power Supply/Float Charger for Lead Acid Ba$eries 1. SAFETY The user is responsible for ensuring that input and output wiring segregation complies with local standards and that in the use of the equipment, access is confined to operators and service personnel. A low resistance earth connection is essential to ensure safety and additionally, satisfactory EMI suppression (see below).
2. INTRODUCTION: The SR250HL range is designed for use as a reliable and stable AC to DC power supply, or float charger for lead acid baDer- ies. Note that for float charging the output voltage must be set to approximately 15% above the nominal baDery voltage models.
SR250HL Series - 250 W Power Supply/Float Charger for Lead Acid Ba$eries 5. MODEL CODING AND OPTIONS Optional Interface Port SR250HL 12 T X G N- 485+ 485 = RS485 232 = RS232 LAN+=SNMP-Webpages 485+=Modbus Serial N= No alarms P= Internal output diode...
SR250HL Series - 250 W Power Supply/Float Charger for Lead Acid Ba$eries 8. TECHNICAL SPECIFICATIONS 250 W (0-50°C ) Output power 180V - 264VAC 45-65Hz Input Voltage 7.5V 13.8V, 24V, 30V, 36V, 48V 60V Output Voltages Other voltages by request 85% - 105% of Vout Voltage Adj.
13. TERMS OF WARRANTY Helios Power SoluEons warrants this product for 24 months from date of shipment against material and workmanship defects. Liabil- ity under this warranty is limited to the replacement or repair of the defecEve product as long as the product has not been damaged through misapplicaEon, negligence, or unauthorized modificaEon or repair.