Helios ICT Platinum Series Instruction Manual page 41

Subnet Mask: Specify the mask for the subnet the
•
power supply is located on.
Gateway: Specify the IP address of the default router
•
(gateway) used for connecting attached devices to
different networks.
Primary DNS: Specify the IP address of the Primary
•
DNS Server for your network.
Secondary DNS: Specify the IP address of the
•
Secondary DNS Server for your network.
Web Server: Configure the unit's internal Web Server port
parameters here. The Web server port numbers can be changed to
any port within the range 1 – 65565.
NOTICE!
Changing these ports may affect your ability to access the
power supply.
HTTP Port: Allows you to change the HTTP port number. This
•
port is used for HTTP traffic between the power supply and
Web browser. The default HTTP port is 80. If you change the
HTTP port to a number other than 80, you will have to append
the new port number to the URL used to access the power
supply (e.g. http://192.168.0.180:8000 for IP address
192.168.0.180, port 8000).
HTTPS Port: Allows you to change the HTTPS port number
•
used by the power supply. HTTPS (HTTP secure) is a protocol
used to encrypt the traffic between Web browsers and servers.
The default HTTPS port is 443.
SNMP: Configure these settings to use SNMP based monitoring.
SNMP (Simple Network Management Protocol) is an industry
standard protocol for network management software, and enabling
the SNMP function will allow standard SNMP management software
to connect to the SNMP agent running on the power supply. Read
real time system information such as battery voltage, output current,
and then have the unit send SNMP traps to the external management
software when an alarm or fault occurs.
41