Helios ICT Platinum Series Instruction Manual page 48

4. Before you can access the panel over the Internet, you will need
to know the WAN IP address of the router, which is assigned by
your ISP. With the Linksys WRT54G router, this information is
available in the Status tab, listed as "IP Address".
NOTICE! If you are using a Dynamic IP address, your WAN IP
Address may change from time to time without warning, depending
on your ISP. You may want to obtain a Static IP address from your
ISP, which will be more convenient to use to access the panel from a
remote location. A Static IP address is a fixed IP address that will not
change. Alternatively, if a Static IP address is not available, you can
use a Dynamic DNS service such as Dyn (see www.dyn.com).
To access the panel over the Internet, type the WAN IP Address
of the router in the location/address field of your browser, followed
by a colon and the HTTP port number that the panel is using (e.g.
http://209.123.10.33:8000 for IP Address 209.123.10.33, Port
8000).
48