Network Setup - Helios ICT Platinum Series Instruction Manual

NTP Server: Choose a server (e.g. time.nist.gov) to be used
•
for network time settings.
Time Zone: Set the time zone the unit is operating in, to
•
ensure correct local time is used for all power supply
operations. (e.g. North American Pacific Time is GMT-8:00
hours)
Set Time Manually: Tick this box to manually set the date
•
and time used by the unit, if desired, then enter the correct
local time and date in the boxes provided.
Data Logging: Enable data Logging by selecting Enabled in the drop
down menu, to record up to the last 30 days of voltage, current and
alarm data, recorded once per minute.
Click on the Download Log (CSV) button to store the CSV format log
file on your computer for further analysis.

5.5. Network Setup

The NETWORK SETUP tab allows you to configure the network
settings of the power supply. To save any changes to the network
settings, click on Save Settings at the bottom of this page. (The
power supply will then reboot)
Network: Configure the basic network settings here.
MAC Address: Displays the unique MAC address assigned
•
to the power supply.
Enable DHCP: Turn on this setting if your network is using a
•
DHCP server to automatically assign IP addresses (DHCP is
enabled by default). To manually assign a Static IP address
to the power supply, uncheck the Enable DHCP box and
then set the following settings:
•
40
IP Address: Specify a unique IP address for the power
supply.