Table of Contents
Advertisement
Reset Comm Settings: Resets the Web server Administrator
password, IP address, and port settings to the original factory default
values. See the Administrator Password / IP Address Reset section for
more information.
3.4. Control Panel Menu Password Reset
This procedure clears the Control Panel menu password and allows
you to set a new password if needed. To clear the password, do the
following:
1. Turn the Power Switch to the OFF position.
2. Press and hold down the Back and Enter keys. Turn the Power
Switch to the ON position while holding the keys down. Continue
holding the keys down for 15 seconds until the System Status
screen is displayed on the Control Panel display.
3. Release the Back and Enter keys. You will no longer be
prompted for a password on any of the Control Panel screens.
4. In order to set a new password, go to the LCD Password Settings
screen.
3.5. Administrator Password / IP Address Reset
This procedure resets the Administrator password, IP address, and
port settings to the original factory default values. The Standard User
password is not affected. To reset, do the following:
1. In the Control Panel menu on the front of the power supply, go to
the Comm & Security Settings screen.
2. Scroll down to Reset Comm Settings and press the Enter key.
3. Select Yes, and then press the Enter key.
4. After reset is complete, go to the Network Status screen in the
Control Panel menu to view the new IP address of the power
supply.
22
Advertisement
Table of Contents
