User Setup - Helios ICT Platinum Series Instruction Manual

If the SMTP server uses STARTTLS (normally port 587), this
box should be unchecked.
Sender E-mail Address: Enter the e-mail address you wish
•
to appear as the sender of the e-mail notifications.
Recipient E-mail Address(es): Enter an e-mail address that
•
will receive the e-mail notifications. This field can also be
used to send a text message notification to a cell phone. See
the Text Message Alarm Notifications section for more
information. Multiple e-mail addresses can be included on
this line, separated by a comma.
SMTP User Name: If your SMTP server requires a user
•
name and password, enter the user name here. Leave this
field blank if your SMTP server does not require
authentication.
SMTP Password: If your SMTP server requires a user name
•
and password, enter the password here. Leave this field
blank if your SMTP server does not require authentication.
Minimum E-mail Interval: Specify a minimum interval
•
required between e-mail notifications. (Default 1 minute,
range 0 to 60 minutes) This time interval is used to prevent
an un-intended flood of e-mail alarm notifications that could
occur when an alarm limit is incorrectly configured, for
example.

5.7. User Setup

The USER SETUP tab allows you to configure passwords for up to
10 users to access the power supply. To save any password
changes, click on Save Settings at the bottom of this page.
The unit has no password assigned by default, so an Administrator
password should be assigned to your panel for improved security.
NOTICE!
Please record your password. If the Administrator password is
lost, the power supply must be reset to return the password to
44