Helios ICT Platinum Series Instruction Manual page 19

PARALLEL STATUS SCREEN
The Parallel Status screen shows the currently configured Parallel
settings. If parallel operation is active, the status and total number of
parallel units is displayed on this screen. Up to 6 Units can be
connected in parallel. See the Smart Parallel Operation section for
more information on configuring the parallel settings.
PARALLEL SETTINGS SCREEN
From the Parallel Status screen, press Enter to move to the Parallel
Settings Screen.
See the Smart Parallel Operation section for more information on
configuring the parallel settings.
Mode: Modifies the parallel mode setting. It has 3 options:
Standalone: Single Unit.
Secondary and Primary: Parallel Units, select one unit in
a set as the Primary, set others as Secondary
Device ID: Modifies the parallel device ID setting. Ranges from 0 – 5.
Give each unit in a parallel set a unique ID number.
19