Loading Menu Items From Usb - Taylor 810 Series Operator's Manual

6. Press the STORE MENU TO USB key.
Figure 6-25
7. Using the keyboard displayed on the control, enter a
file name to save the menu item. The name can have
up to eight characters and must have no spaces.
Pressing the OK key will save the menu item to the
USB flash drive. Press the EXIT key three times to
return to the menu item screen.
8. Remove the USB flash drive from the USB port and
reinstall the USB cable cap on the USB connector.
Operating Procedures

Loading Menu Items from USB

Once the menu file is loaded on the USB flash drive, the
next control board can be programmed from the USB
flash drive.
1. Repeat steps 1 through step 5 from LOADING
STORE to USB.
2. Press the LOAD MENU FROM USB key.
3. The control can display up to 40 different menu
options loaded on the USB flash drive. Select the key
for the correct menu to load. The control will display
DONE at the bottom of the screen when the menu is
loaded. Press the EXIT key twice to return to the
menu item screen.
4. Remove the USB flash drive from the USB port and
reinstall the USB cable cap on the USB connector.
5. To load menu items from the USB flash drive to
another control board, repeat these software-loading
procedures.
Model 810, 812, 820, 822, 828 Series
OPERATING PROCEDURES
6
6-9