Taylor 810 Series Operator's Manual page 27

ADJUST VOLUME Key
The ADJUST VOLUME key displays the current volume.
To increase or decrease the volume, use the Up and
Down arrow keys.
Note: To scroll at a faster rate, press and hold the arrow
key.
Figure 6-16
MENU EDIT Key
The MENU EDIT key is used to program a new menu
item or make changes to an existing one. When the
MENU EDIT key is pressed, the following screen will
display.
Figure 6-17
If there is more than one screen of menu items, press the
Previous or Next arrow keys to access the other menu
items.
Operating Procedures
Press the menu item key to be programmed. The
following screen will display.
To edit a menu item, press the menu item key to bring up
a virtual keyboard. Use the Back arrow to scroll to the
beginning of the name (Item 1). Press the Del key until all
of the characters are removed. Type in the desired name
(up to nine characters) and press the OK key to return to
the previous screen.
If the box is blank (creating a new item), type in the
desired name (up to nine characters). A maximum of two
lines of description can be used. Press the OK key to
return to the previous screen.
ACTIVE: YES or NO
Pressing the ACTIVE key toggles between YES and NO.
Selecting YES will display the menu item on the main
menu screen. If NO is selected, the menu settings remain
saved in the control after the OK key is pressed but will
not be visible on the main menu screen. (See
Figure 6-18)
Model 810, 812, 820, 822, 828 Series
OPERATING PROCEDURES
Figure 6-18
Figure 6-19
6
6-5