Taylor 810 Series Operator's Manual page 48

TROUBLESHOOTING GUIDE
Problem
14.The product is not cooking evenly.
15.The display reads HOME SWITCH
STUCK ON. CLAM ITEMS
BLOCKED. CALL FOR SERVICE.
16.The display reads HOME SWITCH
NOT SEEN. CLAM ITEMS
BLOCKED. CALL FOR SERVICE.
7
7-4
Probable Cause
a. The upper platen or lower grill surface is
not clean and/or has carbon buildup.
b. There is a grease or carbon buildup on
the bottom of the upper platen handles.
c. The release sheet is worn.
d. Release sheet may be too loose, caus-
ing poor heat transfer into product.
e. The product is out of specification.
f. The platen is not level.
g. The preset gap height is incorrect.
h. Air pressure is not high enough.
a. Two-sided cooking options are blocked.
b. Defective stepper motor.
c. Defective stepper motor wire harness.
d. Defective home switch.
e. Defective motor control.
a. Defective motor control.
b. Defective stepper motor.
c. Defective stepper motor wire harness.
d. Defective home switch.
e. Broken platen cable.
Model 810, 812, 820, 822, 828 Series
Remedy
a. Follow closing procedures to prop-
erly clean the upper platen and the
lower grill 
surface and to remove 
carbon buildup.
b. Follow closing procedures to
properly clean and remove carbon
buildup from the 
bottom of the platen handles.
c. Replace release sheet.
d. Readjust the sheet to ensure a
snug fit. It should be tight enough to
prevent creasing, sliding, or
catching by the squeegee. See
guide for proper release sheet 
installation.
e. Product must be within 
specification (proper 
thickness, shape, etc.).
f. Call a Taylor service technician.
g. Call a Taylor service technician.
h. Call a Taylor service technician.
a. Turn the control off and then back
on to clear the fault.
b. Call a Taylor service technician.
c. Call a Taylor service technician.
d. Call a Taylor service technician.
e. Call a Taylor service technician.
a. Call a Taylor service technician.
b. Call a Taylor service technician.
c. Call a Taylor service technician.
d. Call a Taylor service technician.
e. Call a Taylor service technician.
Troubleshooting Guide