Taylor 810 Series Operator's Manual page 36

OPERATING PROCEDURES
Note: If the Standby Alert mode is active and the alarm
is sounding, the STANDBY button must be pressed three
times, with a 1 second pause between presses. The first
press cancels the alarm, and the second two presses
lower the upper platen into the Standby position.
2. To raise the upper platen to the Open position to
resume cooking, press the RAISE button.
CAUTION! Never use force to raise the upper
platen. Damage to components may result. Only use the
RAISE button to raise the upper platen.
6
Menu Parameters
To view the settings and actual temperatures for the
current item, press and hold the menu item key a
minimum of 5 seconds. The screen will display the cook
time, gap setting, temperature set points, and actual
temperature readings for each zone for that menu item.
6-14
Figure 6-38
Figure 6-39
Model 810, 812, 820, 822, 828 Series
If a key is not pressed in 20 seconds, the grill control will
return to the normal display. Pushing the EXIT key will
return to the main display page.
View Software Versions
Press and release the Program key after 2 seconds to
view the software versions and menu item loaded onto
the control. The following items will be displayed:
• Version: Current software version in the display
control.
• Menu: Current menu that is loaded into the control.
• Motor Control Version: Current software version in
the motor control board.
• Motor Control Boot Version: Current bootloader
software version in the motor control board.
Figure 6-40
Operating Procedures